Take control of your heating cost with a waste oil fired heater package from Lanair, the originator of the waste oil fired heater. Our heaters not only eliminate the cost to haul used oil off-site, but they can reduce or eliminate your heating bills too. In addition, burn­ing waste oil is an environmentally friendly way to dispose of waste oil.

With Lanair, you get a quick return on your invest­ment using easy self-installation, factory direct pric­ing, free lifetime phone support, and no costly dispos­al fees of your used oil and fluids. Transform your used synthetic oil, crankcase oil up to 90 wt ( conventional or synthetic), used automatic transmission fluid, and #1 and #2 fuel oil (diesel) into heat!

With non-ductable and ductable options, a heating package can be built that’s right for your property.

Our XT Waste Oil Heaters come with free lifetime phone technical support. For any reason you may need support with service questions or just need parts, call 1-800-562-5504. Lanair’s service tech team will help diagnosis your heater’s issue and get you back up and running in no time. Some of the new improvements made to the XT mod­els are: easy to remove burner, a noncontinuous spark transformer, an hour meter, and a prime switch. Us­ing a full line of options, the XT Series can heat your space up to 1,700 sq. ft., with the XT75, to up to 10,000 sq. ft. with the XT300.

All of these features make it easy for those who compare … buy Lanair!

XT75 Waste Oil Heater

Designed for fitting in corners with­out cutting any. The XT-75 comes with all the standard features of our larger models, but with a ver­tical design for tight spaces. Cus­tomer-inspired and designed for small shops and DIY garages.

• 75,000 BTU’s heat up

to 1,700 sq. ft.

• Burns #1 and #2 fuel oil

(diesel), used crankcase oil (conventional or synthetic), and used ATF

  Small footprint; only 2111W X 26″L floor mounted footprint

• Onboard air compressor

• Metering pump

• Draft gauge

• Cleanable in-tank strainer

• Preassembled for easy installation

XT-200 Waste Oil Heater

The XT-200 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged cham­ber door for easy clean out. It also features a large clean-out side ac­cess panel to the collector box. Some of the new improvements made to the XT models are: easy to remove burner, a non­continuous spark transformer, an hour meter, and a prime switch.

• Up to 200,000 BTU

• Heats up to 5,000 sq. ft.

XT300 Waste Oil Heater

The XT-300 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged cham­ber door for easy clean out. It also features a large clean-out side ac­cess panel to the collector box.

• Heats up to 10,000 sq. ft.

• Up to 300,000 BTU

• Now Burns 100% Synthetic Oil,

along with other used fluids, and more!

• The largest in our new XT Series

See our full line of products including heaters, HVLS fans, and parts, visit us online at Call us toll free at 800-562-5504 for sales. Experience the Lanair difference!


Whole House Heating Solutions

Since 1980, DS, a family-owned business located in Lancaster, Pennsylvania, has made a sincere effort to offer the most competitive and highest quality products available — our intention shows in the products we manufacture.
Traditional craftsmanship defines each product — from coal furnaces to custom metal fabrication. With a goal of high efficiency and low maintenance, along with superior quality, DS products are built to last a lifetime.
Together, each of the four divisions — Stove Manufacturing, Retail, Wholesale, and Custom Production Fabrication — strives for excellence in everything we produce.

DS makes a sincere effort to have the most competitive and highest quality product available, and it shows in the products we manufacture.
Traditional craftsmanship defines each product we manufacture. Anthracite Stoves, Furnaces, Boilers, Water Heaters, Cookstoves, Canners, and Fire Company Gear Racks are just some of what we manufacture. With a goal of high efficiency and low maintenance, along with superior quality, DS products are built to last a lifetime.

Please Visit to learn more


35th Hawkeye Farm Show Set to Feature the Latest in Ag Products and Services

Hawkeye Farm Show March 1-2-3, 2022
9AM – 4PM UNI-Dome
Cedar Falls, Iowa

Cedar Falls, Iowa – The Hawkeye Farm Show is set to run March 1-2-3, 2022, with more than 200 exhibitors featuring over 1000 agricultural products and services. The 35th annual event is hosted on the
campus of the University of Northern Iowa in the UNI-Dome. The event is expected to bring thousands of area ag producers from Iowa, Minnesota, Wisconsin, and Illinois. Admission and parking are free.
A key theme for the 2022 Show is technologies that increase production and also reduce waste and lower expenses. Advanced precision farming techniques will be featured, as well as products and
systems to manage and balance soil fertility. The latest GPS technology will be on display, along with the latest in equipment, tools, seed, chemicals, and management software. Seminars by ISU Extension, Free Coffee & Rolls, and Great Prizes In addition to exhibits, ISU Extension Service and Outreach will be providing in-person agricultural seminars each day at 11:00AM and 1:00PM in the Alumni Room. The seminars are free to attend and feature new topics each day, including Dr. Chad Hart’s Ag Market Outlook for 2022 and Beyond, presented on Wednesday at 1:00pm. The full seminar schedule is available at The website also features an interactive show floor plan, provided by Grinnell Mutual.

Free coffee and rolls will be provided until 10AM each day, sponsored by Farm Credit Services. Attendees can also register for a chance to win $1,000 in Showbucks, given away at 1:00PM each day.
Showbucks can be used as cash to purchase merchandise from farm show exhibitors.

“We are excited to be hosting the 35th Annual Hawkeye Farm Show. The show is a great opportunity to check out the latest in agricultural products and services from more than 200 exhibitors.” stated Show
Manager, Scott Guttormson. “And once again, we have a great line-up of in-person seminars from ISU Extension Service. With free admission and parking, free coffee and rolls, and opportunities to win, it’s a great reason to visit Cedar Falls,” he added.
The Hawkeye Farm Show runs March 1, 2 & 3, 2022 (Tue, Wed, Thu) at the UNI-Dome on the campus of the University of Northern Iowa, in Cedar Falls, Iowa. Admission and parking are free. Show hours are
9AM – 4PM each day. For additional information, go to or contact Scott
Gutttormson at (507) 437-7969.


The Hawkeye Farm Show is produced by Midwest Shows Inc., producer of six annual agricultural tradeshows hosted in Peoria, IL; Tulsa, OK; Vermillion, SD; Sioux Falls, SD; Cedar Falls, IA; and
Oklahoma City. For additional information on Midwest Shows events, visit
Daily Events Schedule
Tuesday, March 1
8:30-10am: Free coffee & rolls (Arena floor)
9am: Exhibits open
11:00am: ISU Extension & Outreach Seminar: The Farm and the Nursing Home: Plans, Powers and Financing.”
Melissa O’Rourke & Jeannette Mukayisire, Farm Management Specialists,
Alumni Room
1:00pm: $1,000 Showbucks drawing
1:00pm: ISU Extension & Outreach Seminar: Transition the Farm to the Next Generation
Kelvin Leibold, Farm Management Specialist, Alumni Room
4:00pm: Show closes
Wednesday, March 2
8:30-10am: Free coffee & rolls (Arena floor)
9am: Exhibits open
11:00am: ISU Extension & Outreach Seminar: Land Price Rental Rates

Wendong Zhang, Associate Professor of Economics, Alumni Room
1:00pm: $1,000 Showbucks Drawing
1:00pm: ISU Extension & Outreach Seminar: Ag Market Outlook for 2022 and
Dr. Chad Hart, Economist, Alumni Room
4:00pm: Show closes
Thursday, March 3
8:30-10am: Free coffee & rolls (Arena floor)
9am: Exhibits open
11:00am: ISU Extension & Outreach Seminar: Maximizing the Value of Manure Nutrients
Brian Dougherty, Field Agricultural Engineer, Alumni Room
1:00pm: $1,000 Showbucks Drawing
4:00pm: Show Closes



Wilger Industries Ltd. was founded in 1976 by Wilfred H. Wilger, the company’s President, to manufacture agricultural field sprayers. In 1985, Wilger designed and began manufacturing a multi-spray head turret, followed shortly by the
Radialock cap and the COMBO-JET all-in-one Tip-Cap with snap-in strainer. In the following years Wilger has developed several other industry leading products which are utilized by major sprayer manufacturers worldwide. Our commitment is to develop and manufacture better engineered, innovative, sprayer components that make spray application safer, easier and more effective.
Wilger has manufacturing and distribution facilities in Saskatoon, SK, Canada and Lexington, TN, USA.

Wilger Industries Ltd.
Site 412, Box 280, RR #4
71 St. & Highway 16 W
Saskatoon, SK, Canada S7K 3J7
Phone:(306) 242-4121
Fax:(306) 242-4122

Wilger Inc.
255 Seahorse Drive
Lexington, TN, USA

Phone:(877) 968-7695
(731) 968-7695
Fax:(877) 968-7613
(731) 968-7613

Wilger Argentina
Mitro 697
San Nicolas (2900)
Buenos Aires, Argentina
Phone:+54 9 336 4596710


Energy from the Wind is a Technology

whose Time Has Come Download The COUPON/REBATE

Clean, Quiet, Inexhaustible

Energy from the Wind is a Technology

whose Time Has Come…
> Electricity from our wind turbines costs less than a Penny per kWh
> The average cost per kWh in the Midwest is typically 12-18 cents/kWh

(Investing in your own Wind Turbine is like ‘Prepaying’ your Electric Bill. Once the system is paid for, typically in 24-48 months, you receive FREE Electricity for the Next 40 to 50 Years! This could save you over $500,000)

An investment in wind energy offers a number of significant advantages.

First, the energy savings over the lifetime of your wind system can easily exceed one-million dollars due to the Midwest’ strong winds and high utility rates.

Second, if your business has potential tax liabilities an  investment in wind energy qualifies for a 26% Federal Energy Tax Credit. This is a dollar-for-dollar credit that may be carried forward to subsequent tax years.

You are also eligible for ‘bonus depreciation’ which allows you to depreciate 100% of the cost in the first year.

Third, most of our clients receive a 25% REAP (Rural Energy for America Program) cash payment.

Fourth, there is a multiple turbine cash rebate available. All these valuable incentives allow the system to pay for itself in as few as 14 months!

Fifth, the tower is designed to tilt up or down for installation and service and therefore never requires a crane. This innovative feature can easily save you tens of thousands of dollars over the life of your system.

Finally, there is the personal satisfaction of achieving energy independence and playing a major role in helping protect our environment for our children and grandchildren.


We evaluate your energy usage, utility rates and wind resource to help design a system that is properly sized to meet your needs and acheive your long-term objectives. This allows us to offer a system from 15kW to 150kW that is cost-effective and designed for decades of service.



Nothing Beats A Beefmaster


Pay day starts with superior Beefmaster cows. Indeed, the Beefmaster female has stayed true to her original purpose: to help ranchers in tough environments improve performance, survivability and longevity. So, if you are giving up ground in traits that matter, consider Beefmasters. The breed will jump-start your cattle and give your next calf crop a performance boost.

     Beefmaster is a beef breed developed in America that improves beef quality and production efficiency when crossed with any other cattle breed for commercial beef production. The breed originated in Southern Texas in the late 1800s into the early 1900s. The Lasater family originally developed a large herd of Hereford cattle carefully selected to withstand the heat and insects of the Texas Gulf Coast region, but they were still not perfectly suited to that difficult environment. So Lasater began to experiment with incorporating Bos indicus or Zebu genetics, in the form of Gyr and Guzerat bulls from India and Nelore from Brazil. While the practice of crossbreeding was virtually unheard of at the time, they immediately saw a tremendous jump in productive traits, such as weight gain and reproductive rates. This is genetic advantage known as heterosis or hybrid vigor.

     By the early 1930s, the ranch also incorporated Milking Shorthorn genetics, to augment milk production and carcass quality. They could immediately see that the three-way hybrid was far superior to the two-way crosses. The final composite ended up at roughly 50% Bos indicus and 50% Bos taurus (25% Hereford and 25% Shorthorn).

     As Lasater developed the breed, he also formed a unique selection philosophy known today as The Lasater Philosophy. The concept is to only select cattle for economically relevant traits, which he distilled to these Six Essential traits. The Six Essentials are weight, conformation, milk production, fertility, hardiness and disposition. It is the only breed in history to be selected only using pressure for productive traits, as opposed to aesthetics.

     In 1937, the herd was closed to outside genetics with continued internal development to cull low-performers and upgrade all traits together equally. By 1954 the foundation herd was recognized by USDA under the name of Beefmaster. In 1961, Beefmaster Breeders United (BBU) was founded and is headquartered in Boerne, Texas. Beefmaster ranks fifth in the U.S. in terms of membership and is the largest of the American breeds. The association has over 3,000 members registering around 19,000 calves annually. Beefmasters also enjoy a rapidly growing international footprint, with established associations in nine countries worldwide.

     The breed has rapidly grown around the world and has become known as the prime maternal cow for serious commercial cattlemen that appreciate their production excellence, particularly in harsh desert or tropical environments. The breed has excelled across most regions of the United States and several other Latin American regions. With global demand for higher-quality beef growing geometrically, Beefmasters provide the perfect breed to cross on commercial cattle to improve production efficiency and carcass quality, while not sacrificing adaptability.

     Beefmasters are well known within the international beef industry for their successful adaptation in tropical climates. While this has proven true in Central America and Thailand, this unique breed succeeds in high altitude deserts, as well as in cold and wet environments. The Lasater Foundation herd was moved in 1948 to Matheson, Colorado – where it remains to this day. The Lasater Ranch is located on the Rocky Mountain plains, which is known for its high altitude, snow, extreme cold and meager grassland for foraging. Beefmaster cattle also flourish in the deserts of South Africa, Botswana, and Zambia. They thrive in the mountains of Colombia and Venezuela, as well as Montana, Oregon, New Mexico, Kentucky, and Wisconsin.

     Commercial cattlemen have noted substantial economic gains from using Beefmasters to provide an average increase of 60 pounds, or more at weaning when compared with other breeds. They excel post-weaning as well, with faster weight gains, excellent feed conversion and carcass yields around 64%. Land grant universities in Texas, Florida, and Oklahoma are conducting research projects to evaluate carcass quality and feed efficiency through utilizing Beefmaster for crossbreeding on popular breeds such as Angus, Charolais, Hereford, Simmental, Limousin and even some dairy breeds. The Noble Research Institute is also working with Beefmaster Breeders United to conduct economic research on grass-fed, and grain fed carcass merit. Their research points to the heterosis gains showing “an extra calf” when weaning weights produce 110-165 extra pounds per calf born.

     In a time when sustainability is becoming increasingly critical, Beefmasters have repeatedly demonstrated that they are highly efficient converters of both forage and feeds into lean, tender, high-quality beef. A recent study at the U.S. Department of Agriculture Meat Animal Research Center (MARC) demonstrated Beefmaster’s dominance when compared to 18 of the most widely used beef breeds in the United States.

     To summarize, the Beefmaster female excels in all maternal traits. They get bred easily, year in and year out. They make raising good calves look easy. And they possess excellent longevity because they do not break down in tough environments. So, if your cow herd has lost its ability to adapt to changing times or challenging environments, maybe it is time to rebuild with proven, Beefmaster females. Nothing beats a Beefmaster. Learn more about what the Beefmaster cow can do at